Recent Blogs Posts

Originally Posted by laurals53

How to install and run WebZeal

First download the latest version of WebZeal fom HERE

Once unzipped copy the WebZeal.mnt file onto an empty USB stick
and insert the USB stick into the USB port on the rear of the receiver.

Now click Menu -> Storage Manager



Using the < > arrow keys set Current Device to File Mount Drive

...

Originally Posted by laurals53

How to install and run all the Free TV+ addons

First download and unzip the Free TV+ addons from HERE

Now selct which one your going to install as you can only install one at a time.
Metacafe
You****
Fassion TV
YouTube
SVTPlay

Once you selected which file to install first
place both the xxx.addon and xxx.png onto an empty USB stick
[xxx represents the name of the file]

Your USB stick should only have two

...

How to install and configure xmltv-import on Enigma2 Pli-images
When you have installed OpenPli on your box, you can go to Applications, press the green button. Then you'll see a menu, go to extensions and look for xmltv-importer.
Press enter or OK button to start the installation. Now you have the latest version installed, restart Enigma and go to applications and you will notice the label "EPGImport".
Now go into this program, there are some options but first we ...

How to guide:
Check if your Openbox box is a clone
A short guide detailing how you can check if your OpenBox satellite receiver (S9 HD & S10 HD) are clone or genuine.
How to identify clone Ali3602 HD Receiverall consumers :
if you have an Ali3602 HD Receiver like S9,S10…there has a method to identify if it is original (quality goods) or clone
.. Before identify , please backup your old software on the box by usb. Downloaden, upgraden via USB. Download , upgrade ...

!Firmware upgrade instructions

1. Download the latest firmware update from the OpenBoxS10.info support page at http://www.openboxs10.info/ Place this on your USB flash drive and insert into your OpenBox S10 HD PVR.

Backup your existing satellite settings and channels (optional)

A. Go to MENU > TOOLS > DUMP BY USB. Use left or right arrow to select MISC FILES, then arrow down to SELECT & DUMP. Press the OK key.

B. Press the GREEN ...