Random reboots on Innovation.

[olvi]

Hello,
My Fortec Star Innovation with the latest firmware (- av126fs) associated with a PowerCam Pro HD V3.2 reboot randomly when I am on an HD channel, with no action on the remote.
Sometimes the receiver reboot after 2 minutes or after 20 minutes. It is impossible to watch an HD channel correctly.
The problem does not occur on an SD channel.
Have you some ideas ?

[pgmabley]

If you have live rewind turned on, try turning it off, worked for me.

[olvi]

If you have live rewind turned on, try turning it off, worked for me.

Hello,
What is "live rewind" ? Can you be more specific on the live rewind.
Thanks.

[pgmabley]

In one of the menus it has a live rewind option, off, 5 mins or 30 mins from memory.

It is the function where you can rewind live tv.

[olvi]

Ok, it's turning off since the last flash, so it's not the reason of reboot.
Another ideas ?

[pembo]

mine does the same - it only happens on the latest firmware, so it's either wait for a new version (which isn't looking likely!) or go back a version.

[bouncerdove]

Hi. I have had most of the problems you all keep posting, but I must say that if you do a complete factory reset BEFORE installing the latest software it seems to make a far better install. I have an Innovation running the latest software, and apart of a few minor problems (reported on this site) it seems very stable and reliable.
I must add that owning my Innovation from the day it was released, it has taken a couple of years to reach this point. Which really is not really acceptable.
Regards bouncerdove

[olvi]

Hi, I installed the september 2009 firmware and all is OK. Thanks Mister Fortec Star to your latest bugged firmware.